HP DreamColor LP2480zx RGB-LED 24 1610 True 10-bit IPS Monitor, A-TW Polarizer

HP DreamColor LP2480zx Professional RGB-LED Backlit 24 16:10 1200p 1920x1200 True 10-bit (not 8-bit + FRC) IPS (In-Plane Switching) LCD Display / Monitor (Carbonite), with A-TW (Advanced True-Wide) Polarizer. Factory Sealed, in it's original HP box. DisplayPort / DVI / HDMI / Component. True 10-bit (Not 8-bit + FRC). HP DreamColor LP2480zx Professional LED Backlit 24 IPS LCD Monitor (Carbonite).

Software CD (Includes HP Display Assistant & Drivers). DreamColor LP2480zx Professional LED Backlit 24 IPS LCD Monitor. Features a 24-inch viewable image area along with a native resolution of 1920 x 1200, a 6 ms gray to gray response time, and a 1,000:1 contrast ratio. This display utilizes IPS technology, providing enhanced 178° horizontal and vertical viewing angles.

Additionally, the display supports a maximum brightness of 250 cd/m², and a minimum brightness of 50 cd/m². This color-critical display comes complete with 100% Adobe RGB and sRGB color coverage and supports over 1 billion colors. You also benefit from an enhanced look up table with 12 bits per entry and support for up to 1,024 entries per table. This HP DreamColor display supports a variety of OSD functions to simplify the process of adjusting the display settings.

Supported OSD functions include color space, luminance, whitepoint, primaries and gamma information, reset to factory calibration, reset to last calibration, black level, overdrive, custom scaling, PIP controls, language, power saver, power on recall, bezel button LED, auto EDID update, and much more. Setup and configuration of this HP DreamColor display has also been simplified as it supports a variety of connections including DVI-I, DisplayPort 1.1, HDMI 1.3, component, S-video, and composite inputs. Once configured, the monitor can be swiveled, tilted, pivoted, and raised or lowered to provide enhanced viewing comfort. Please note: It is not possible to perform DreamColor color management on this monitor with a YCBCR (YUV) input signal.

To perform DreamColor color management with a YCBCR input signal, the signal must be converted to a digital RGB signal using separate hardware such as an SDI converter. Enjoy support for over one billion active colors, 64 times the colors supported by traditional LCD displays, with innovative 30-bit LCD panel technology. Achieve what you intended with enhanced color fidelity through a tri-color LED backlight, work with deeper colors, CRT-class black, and programmable white all on a 24-inch diagonal wide-aspect screen. Customize seven color space resets for luminance, gamma, gamut, and white point, to achieve a completely accurate rendition of sRGB, Adobe RGB, Rec.

709, and DCI-P3 (97%) at the touch of a button. Get connected to all of your devices with analog, DVI-I, DisplayPort 1.1, HDMI 1.3, component, S-video, and composite inputs, along with HDCP support for protected content, and an integrated USB hub. Be comfortable with adjustable tilt, swivel, height adjustment, and pivot rotation. Quickly customize a range of user and color calibration settings with a completely redesigned onscreen display.

Additionally, the auto-fade backlit bezel buttons enable easy viewing in bright and dark work environments. 24.0 / 61.0 cm. Maximum White Luminance: 250 cd/m² Minimum White Luminance: 50 cd/m² Black Luminance: 0.05 cd/m² (typical black level at minimum white level).

12 ms typical (rise+fall, full black-to-white-to-black) 6 ms typical (gray to gray). Programmable from "gamma" value of 1.0 to 3.0. Native gamut approximately 133% NTSC (typical in CIE 1976 u'v' space). 100% Adobe RGB coverage (typical) 100 sRGB coverage (typical). Over 1,000,000,000 colors in native mode.

12 bits per entry, 1024 entries per table. Minimum 10 bits/color throughout video processing pipeline. 0.71 / 1.8 cm. Buttons or Switches Function Select, Input Select/Exit OSD, Plus (+), Minus (-), Menu/Select, Power OSD Languages Chinese (simplified), Dutch, English, Spanish, French, Italian, Japanese OSD Functions (partial list) Color Space, Luminance, Whitepoint, Primaries and Gamma Information, Reset to Factory Calibration, Reset to Last Calibration, Black Level, Overdrive, Custom Scaling, PIP Controls, Language, Power Saver, Power on Recall, Bezel Button LED, Auto EDID Update, Sleep Timer, Function (button) Control, Monitor Status Message, Warning Messages, Calibration Limit, OSD Button Labels, Mode Display, Video Input Control, Input Auto-Switching, Information (menu), Factory Reset. Intuitive OSD supporting key features of monitor.

Horizontal 24-80 kHz Vertical 47-61 Hz (No internal frame rate conversion at 48, 50, and 59.94/60 Hz). 200 MHz on DVI-I (analog), HDMI, and DisplayPort inputs; 165 MHz max on DVI-I digital inputs. 20 additional user-programmable timings may be stored. 7 color space presets; all user-programmable six factory programmed: sRGB, Rec. 601, Adobe RGB, DCI-P3 emulation (97%), full gamut.

2 x DVI 1 x DisplayPort 1.1 1 x HDMI 1.0 with HDCP support 1 x Component (YPbPr) 1 x S-video 1 x Composite. Self Powered USB 2.0 Hub 1 x upstream, 4 x downstream USB 2.0 ports. VESA VSIS 0.7V black-to-white, nom. 75 ohms, all analog inputs. TTL (analog input section of DVI-I inputs).

1 VGA to DVI-I, 1 DVI-D to DVI-ID 1 DisplayPort, 1 HDMI, 1 USB. 6.6 ft / 2.0 m (all). AC Line Voltage: 100-240 VAC Frequency: 50/60 Hz Typical Power Consumption: 42 W (120 VAC, no USB devices connected, and sRGB Color Space preset) Maximum Power Consumption: 90 W Power Saving: 10 W in "sleep" mode; 3W in "off" mode Power Cable Length: 6.2 ft / 1.9 m. 3.94 / 10.0 cm range. Operating Temperature: 41 to 95°F / 5 to 35°C Non-Operating Temperature: -4 to 140°F / -20 to 60°C Operating Humidity: 20 to 80% non-condensing Non-Operating Humidity: 5 to 95% (101.6°F / 38.7°C max wet bulb temperature) Operating Altitude: 0 to 12,000 ft / 3,650 m Non-Operating Altitude: 0 to 40,000 ft / 12,000 m.

Yes (standard 4 hole pattern, 100 mm). Without Stand: 14.8 x 22.2 x 3.9" / 37.6 x 56.4 x 9.9 cm With Stand: 20.7 x 22.2 x 10.0" / 52.6 x 56.4 x 25.4 cm. 18.7 lb / 8.5 kg. 22.2 x 20.7 x 10. IPS 24-in (60.96-cm) wide-aspect screen. 24 in (60.96 cm) wide-aspect screen. 178 degrees to CR of 10:1 min. 12 ms (rise+fall, full black-to-white-to-black); 6 ms (gray to gray). Backlight Life (to half brightness). Programmable from'gamma' value of 1.0 to 3.0. 133% NTSC (in CIE 1976 u'v' space). Over 1 billion colors in native mode. 10 bits/color throughout video processing pipeline. 0.71 in (1.8 cm). On Screen Display (OSD) & Controls. Function Select, Input Select/Exit OSD, Plus (+), Minus (-), Menu/Select, Power. Chinese (simplified), Dutch, English, Spanish, French, Italian, Japanese. Color Space, Brightness, Color Temp, Reset to Factory Cal. Reset to Last, Black Level, Overdrive, Custom Scaling, Crop (L-C-R), PIP Control, Auto Adjust, H Position, V Position, Clock, Clock Phase, Hue, Saturation, Language, Intuitive OSD supporting key features of monitor. No internal frame rate conversion at 48, 50, and 59.94/60 Hz.

7 color space presets; 1 user-programmable plus six factory programmed: sRGB, Rec. Programming color space presets requires use of optional calibration accessory and software. DVI-I (2), DisplayPort 1.1, HDMI 1.3, Component (YPbPr), S-Video, Composite.

Self Powered USB 2.0 Hub. 1 upstream, 4 downstream USB 2.0 ports. 1 VGA to DVI-I, 1 DVI-D to DVI-I, 1 DisplayPort, 1 HDMI, 1 USB. 6.6 ft (2.0 m) (all). Voltage 100 - 240 VAC.

42 W (120 VAC, no USB devices connected, and sRGB Color Space preset). 10 W in'Sleep' mode; 3 W in'Off' mode. 6.2 feet (1.9 m). Dimensions (H x W x D).

Unpacked : 16.7 to 20.67 x 22.24 x 10 inches (42.5 to 52.5 x 56.5 x 25.4 cm). (head only): 14.76 x 22.24 x 3.86 inches (37.5 x 56.5 x 9.8 cm). Packaged : 18.43 x 26.85 x 14.6 inches (46.8 x 68.2 x 37.1 cm). Unpacked : 27.5 lb (12.5 kg). (head only): 18.7 lb (8.5 kg).

Packaged : 33 lbs (15 kg). 3.94 in (10.0 cm) range. 41° degree to 95° degree Fahrenheit (5 to 35° degree Celsius). 4° to 140° degree Fahrenheit (20 to +60° degree Celsius). 5 to 95% 38.7 degree Celsius max.

0 to 12,000 feet (3650 m). 0 to 40,000 feet (12,000 m). The item "HP DreamColor LP2480zx RGB-LED 24 1610 True 10-bit IPS Monitor, A-TW Polarizer" is in sale since Monday, April 27, 2020.

This item is in the category "Computers/Tablets & Networking\Monitors, Projectors & Accs\Monitors". The seller is "zecommerce" and is located in Salt Lake City, Utah. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Costa rica, Dominican republic, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Model: DreamColor LP2480zx
Maximum Resolution: 1920 x 1200
Contrast Ratio: 1000:1
Brightness: 250 cd/m²
Item Height: 16.7 to 20.67 inches
Item Width: 22.24 inches
Aspect Ratio: 16:10
Refresh Rate: 60 Hz
Product Line: HP Dreamcolor
Features: Anti-Glare
Color: Black
MPN: GV546A4#ABA
Video Inputs: Component BNC
Response Time: 6 ms
Item Length: 10 inches
Brand: HP
Most Suitable For: Casual Computing
Screen Size: 24 in
Display Type: IPS LED